home *** CD-ROM | disk | FTP | other *** search
-
- ╔═══════════════════════════════════════════╗
- ║ QuickView Ver. 1.03 ║
- ║ ║
- ║ DOS based Multimedia viewer ║
- ║ No Windows is required! ║
- ╚═══════════════════════════════════════════╝
-
-
-
- For the German documentation please read QV.DOK.
-
- QuickView is Shareware. This means that you can test it for at most three
- weeks. After that period you must register, i.e. pay a small registration
- fee or discontinue using it. See REGISTER.DOC for details.
-
-
- Features of QuickView:
- ──────────────────────
-
- Some call it QuickView others call it the possibly fastest viewer of the
- world.
- QuickView views the following file formats at present:
-
- - .AVI: Codecs: DIB (8 bit and 24 bit),
- RLE (8 bit),
- MS Video 1 [msvc] (8 bit),
- MS Video 1 [msvc] (16 bit),
- Cinepak [cvid] (24 bit),
- Ultimotion (OS/2 AVIs) [ULTI] (16 bit)
- With sound through a Sound Blaster or the PC speaker.
- Sound can be either uncompressed or Microsoft ADPCM compressed.
- You have the option to adapt the quality to your system's speed.
-
- - .BMP: uncompressed: 1, 4, 8 and 24 color bits
- RLE compressed: 4 and 8 color bits
- including OS/2 bitmaps
- furthermore all kindred formats:
- .RLE, .DIB, .BGA, .VGA, .RLE, .RL4, .RL8
-
- - .CEL (Original Animator CEL Files)
- .FLC,
- .FLI,
-
- - .GIF: 1-8 color bits
- Gif 87a and most Gif 89a extensions
-
- - .ICO: Windows Icons
- OS/2 Icons (partly)
-
- - .PCX: 1-4, 8 and 24 color bits
-
- - .PIC: Videodat .PIC files
-
- - .TGA: uncompressed: 8 and 24 color bits, 1-bit black & white
- RLE compressed: 8 and 24 color bits
-
- - .VOC: through a Sound Blaster or the PC speaker
-
- - .WAV: through a Sound Blaster or the PC speaker
- PCM and Microsoft ADPCM compression supported
-
-
- System Requirements:
- ────────────────────
-
- QuickView will run on any IBM PC compatible computer under DOS 3.0 or
- better with at least a 80286 processor. For viewing AVI files at least a
- 80386 processor is required. You must have a VGA card in your system. CGA,
- EGA and Hercules cards are not supported.
- For Sound Blaster support you must have the Environment variable BLASTER
- set that contains port address, interrupt and DMA channel.
-
- QuickView will run under Windows 3.1 and 95 in a DOS shell. PC Speaker
- sound will not work in a DOS shell. You have to disable sound with AVIs
- or run QuickView under plain DOS.
-
- QuickView can view images larger than the available video hardware would
- allow. This is accomplished by storing only those pixels in the main
- memory that are outside the visible part of the image. This leads to
- low memory requirements. Scrolling is not yet possible for pictures with
- more than 8 color bits.
-
-
- Installation:
- ─────────────
-
- Simply place all files of the package in a directory. That's it!
- QuickView will automatically detect your machine, memory and graphics card.
-
-
- Command Line Format:
- ────────────────────
-
- The command line format to run QuickView is:
- QV [/M] [/V] [/Rx] [/S] [/Lx] [/I] [/A] [/2] [/4] [/Qx] [/Fx] [filename]
-
- Options:
- /M Select 50 lines menu mode. QuickView uses 25 line menu mode by
- default. For 50 lines you can use the /M option
- /V Don't use VESA. QuickView autodetects many graphics cards and uses
- VESA by default. The /V option tells QuickView to not use the VESA
- interface if installed, but if you want to use HiColor or TrueColor
- modes the VESA interface must be used. If your graphics card does not
- support VESA you can use a VESA TSR like UNIVESA or UNIVBE (see
- below).
- /Rx Select screen resolution:
- x=1: 320*200
- x=2: 640*480
- x=3: 800*600
- x=4: 1024*768
- If a mode is not possible the nearest available will be used.
- default: auto select
- /S Disable vertical hardware scrolling as this may cause problems on some
- graphics cards.
- /Lx Loop FLI/FLC x times, 0 => until key pressed, default: 0
- /I Don't use Auto Init SB
- /A No sound with AVIs
- /2 AVI Zoom 2x
- /4 Don't use 320*240, 256 colors mode with AVIs. QuickView will use
- 320*240*256 mode by default if it allows to play the AVI full screen.
- /Qx AVI quality:
- x=0: TrueColor
- x=1: HiColor
- x=2: 256 colors
- x=3: Grey Scale
- Please note that these options are not available for all codecs. For
- details see the AVI options below. The default TrueColor will give
- best quality with all AVIs however it requires the most CPU power.
- /Fx Start AVI at frame x, e.g. /F137 (only in registered version)
-
- All parameters are not case-sensitive.
-
- filename can be a file that QuickView views or a name that contains the
- wildcards * and ?.
-
- Example: QV /A /Q2 VIDEO.AVI
-
-
- The Menu:
- ─────────
-
- QuickView always shows you all the files in the current directory, along
- with all the visible subdirectory names. The arrow keys will move the file
- selector bar around. By pressing a character the file selector bar jumps to
- the first file starting with that character. Use lower case for files,
- upper case for directories. A mouse is not supported.
- To view a file or change a directory just hit Enter. If you try to view
- a file QuickView does not handle nothing will happen. If you have tagged
- some files (256 at most) QuickView will view these files without going to
- the menu in between. Hit Enter or Tab if you want to view the next file
- and Backspace for the previous one. Esc breaks and returns to the menu.
-
- More keys during file selection:
-
- ALT-D: Change drive. A drive selection box will appear, prompting you for
- the drive letter you want to log onto. QuickView will attempt to
- change to the desired drive. If an error occurs, QuickView will
- remain logged onto the current drive.
-
- F1 : Help
-
- F2 : Display information about the processor, detected graphics card,
- sound card and free memory.
-
- F3 or
- ALT-I: Get information on the currently selected file.
-
- ALT-O: Change options of QuickView. For details see below.
-
- + - : Increase or decrease resolution respectively. The currently
- selected resolution is highlighted. "Automatic" automatically
- selects the lowest resolution which will display the whole picture
- if possible.
-
- Space: Tag/untag the current file
-
- ALT-T: Tag all files in the current directory
-
- ALT-U: Untag all files.
-
- ALT-A: Show all 32*32 pixel Windows icons in the current directory. You
- can use a higher resolution to see more icons on the screen.
-
- ALT-X: Exit QuickView and return to DOS.
-
-
- Options:
- ────────
-
- Press the red characters to toggle the state of the option. You can also
- use the up/down arrow keys and the Space bar. If you press "C" a configu-
- ration file is created or updated. Command line options override the config
- file. Note that changing the use of VESA is only effective if you leave
- QuickView and start it again.
-
- AVI options:
- Sound support: Sound through a Sound Blaster does not cost much time but
- sound through PC speaker might slow the system down noticably. If you
- have problems during AVI playback try turning off the sound.
- AVI loop: Use this if you want an AVI to start again after viewing.
- 2x Zoom: QuickView will display AVIs twice as big and so allow full screen
- playback for appropriate AVI resolutions. Note that 2x Zoom might require
- a higher screen resolution and therefore the AVI will not appear bigger
- if this is the case. 2x Zoom is very CPU intensive and might slow down
- your system, so QuickView will therefore use at most HiColor output if
- 2x Zoom is selected.
- 320*240 mode: Many AVIs have the size 320*240. QuickView will display these
- AVIs full screen if you switch on this option. 160*120 AVIs will also be
- displayed full screen if you also switch on 2x Zoom. Note that 320*240
- mode is only available with 256 color modes. 320*240 is a non-standard
- VGA mode and may cause problems with some graphics cards or if you use
- QuickView with other operating systems.
- AVI quality: These options depend on the codec used in the AVIs:
- Grey scale: This is only available for Cinepak and Ultimotion compressed
- AVIs as only these can be speeded up. If you use this option with AVIs
- using another codec QuickView will use 8 color bits output.
- 8 color bits: This option is available for all codecs.
- HiColor: QuickView will use HiColor output with Cinepak compressed AVIs and
- will give the best quality for all other codecs.
- TrueColor: Will give the best quality for all codecs.
-
-
- Commands While Viewing:
- ───────────────────────
-
- For all file types:
- Esc: Stop viewing.
-
- For pictures:
- Arrow keys: Scroll picture if it is larger than the screen.
- Ctrl-Arrow keys: Scroll fast.
- Home, End: Scroll to left or right border respectively.
- Enter or Tab: View next file.
- Backspace: View previous file.
-
- For AVI:
- Space: Pause Viewing, space again: next frame, any other key: continue.
- Arrow-key left, right: forward, rewind respectively.
- CTRL-Arrow-key left, right: fast forward, rewind respectively.
-
-
- Questions & Answers:
- ────────────────────
-
- -Q: QuickView doesn't detect my sound card.
- A: Make sure that your BLASTER environment variable is set correctly.
- There must be a command in your AUTOEXEC.BAT like this:
- SET BLASTER=Axxx Ix Dx Hx Pxxx Tx
- with
- A: Sound Blaster base I/O-port,
- I: interrupt,
- D: DMA low channel,
- H: DMA high channel (only required for SB16),
- P: MIDI port,
- T: Sound Blaster Type (not necessary for QuickView)
-
- -Q: I don't hear sound with some AVIs.
- A: Some AVIs don't have the audio separated into pieces, so QuickView must
- load the audio beforehand to XMS. If there is not enough memory
- available then the audio is omitted. I some cases it helps to reduce
- the number of colors.
-
- -Q: The AVI stops after first frame.
- A: Try command line option /I to turn off Auto Init DMA.
-
- -Q: Sound is interrupted with some AVIs.
- A: At least one component of your system is too slow.
- Try copying the AVI to your hard disk if you play it back from CD.
- Switch off 2x Zoom. Choose a lower number of colors.
-
- -Q: I use PC speaker output because I don't have a sound card. I always
- hear clicks with AVIs when the program reads from the hard disc or from
- CD ROM.
- A: To allow good PC speaker sound 100% CPU time is required. This works
- with VOCs and WAVs but of course not with AVIs. Each time the program
- accesses the hard drive or a CD-ROM the sound must be interrupted.
- Windows does not support PC speaker sound with AVIs!
-
- -Q: Why is the video quality bad with some AVIs?
- A: This is because you don't have a TrueColor or HiColor card or you don't
- have a VESA driver in your system. In the latter case you should use
- the VESA TSR for your graphics card, UNIVESA or UNIVBE, available on
- many FTP-servers, BBSs, from Shareware distributors or on my WWW page.
- The VESA driver must conform at least to version 1.2 of the VESA
- standard. Versions prior to 1.2 of the VESA standard did not define
- TrueColor and HiColor modes.
-
- -Q: I get the message "Your system doesn't have enough main memory to show
- the file" with some AVIs. What can I do?
- A: Select a lower number of colors, e.g. HiColor instead of TrueColor.
- Turn off sound.
-
- -Q: I can't forward and rewind AVIs.
- A: Either the AVI has no index or a bad index. Or there is not enough
- memory.
-
- -Q: I like 50 lines menus more. How can I select this mode permanently?
- A: Press ALT-O in the menu. Then you can select 50 lines with "5" and
- write a config file with "C".
-
-
- Known problems:
- ───────────────
-
- - The Indeo codecs used in some AVIs are not supported yet. You will get
- the message "Unsupported codec" with these AVIs. Indeo support is in
- progress.
- - 16 bit MS Video 1 compressed AVIs in 8 color bit mode can't be displayed
- 2x zoomed or using 320*240 mode.
- - Compressed VOC files are supported but sound quality is not yet as good
- as it should be.
-
-
- A .MOV to .AVI converter
- ────────────────────────
-
- is available at ftp.intel.com /pub/IAL/multimedia/smartv.exe
-
-
- How to get an up-to-date version of QuickView:
- ──────────────────────────────────────────────
-
- The file name of the package is always qvxxx.zip where xxx means the
- version number. Note that some BBSs use a different archiver than ZIP.
-
- - Internet WWW:
- My Homepage: http://www.rhrz.uni-bonn.de/~uzs272
- You will get the latest version including minor revisions there.
-
- - Internet FTP:
- Official FTP distribution site (you will find the most recent version
- here including minor revisions):
- ftp.rhrz.uni-bonn.de /pub/institute/hesseler
- Major releases are also available from:
- SimTel: primary mirror site is ftp.coast.net /SimTel/msdos/graphics
- Garbo: garbo.uwasa.fi /pc/graphics
-
- - Usenet News:
- It will be posted to the newsgroup alt.binaries.pictures.utilities.
-
- - BBS:
- "Airbase" (Bad Neuenahr, Germany), 24h online, Sysop: Michael Krischok
-
- Line 1: +49-2641-29108 [ZyXEL] Fido: 2:2453/300
- Line 2: +49-2641-202607 [ISDN] Fido: 2:2453/301
-
- login as user: Quickview and Password: Quickview.
- Fido users can frequest QuickView using the magic "QUICK".
-
- - Send me an email (hesseler@athene.informatik.uni-bonn.de) with
- "Request QuickView" as subject.
-
- - Via snail mail. Send me a floppy disk with a self-addressed and stamped
- envelope. This works only if you have German stamps. Otherwise send me
- money to cover my expenses. Please fill out the registration form so that
- I get your address and check "QuickView current shareware version".
-
- - You'll get the latest version when registering.
-
-
- Further Developments of QuickView:
- ──────────────────────────────────
-
- Depending on the wishes and the number of registrations I plan to add
- more file formats: PNG, JPEG, QuickTime .MOV, .DL, .GL, MPEG, ...
-
- You see: You should support QuickView and register!
-
-
- How to contact the author:
- ──────────────────────────
-
- Please report all bugs and suggestions for improvements or enhancements.
- I'm also very interested in files that QuickView claims to show but
- doesn't play or display correctly. Feel free to contact me.
- You may use one of the following ways:
-
- My Internet address (this is the preferred way):
- hesseler@athene.informatik.uni-bonn.de
- If you're in the Bitnet you may also use the following address:
- uzs272@dbnrhrz1
-
- If you don't get a reply within a week please send it again. Emails can
- get lost.
-
- If you don't have email access here is my snail mail address:
-
- Wolfgang Hesseler
- Neustadter Str. 6
- D-53547 Rossbach
- Germany
-
- Please include return postage, using International Postal Coupons if you
- are outside Germany.
-
-
- This program is Shareware. You may test this unregistered version for at
- most three weeks but after that you must register. You are encouraged to
- share it with others and to upload it to a BBS. If you do so, please pass
- along the complete unmodified archive. All files must be included.
-
- ATTENTION: A registration is required for any commercial use.
-
-
- QuickView is (c) 1994,95 by Wolfgang Hesseler, all rights reserved
-
- I make no warranty of any kind either expressed or implied. In particular I
- make no warranty as to merchantability or fitness for a particular purpose
- or a particular hardware configuration. Furthermore I am not responsible
- for any damages of any kind, including profit losses and data loss or other
- incidental or consequential damages arising out of your use or inability
- to use the program. The person using the software bears all risk as to the
- quality and performance of the software.
-
- All files belonging to QuickView contain proprietary information which are
- protected by copyright. This includes reverse engineering, decompiling and
- disassembling. No part may be altered or translated without the prior
- written consent of the author. Any violation of the copyright will be
- prosecuted.
-
- License agreement for Shareware distributors:
- Shareware distributors may distribute this program as long as the charge
- does not exceed $5US and the shareware distributor will not change or leave
- out any file. Please notify me if you distribute QuickView as you should
- always distribute the latest version. This applies especially if you
- include QuickView on a CD-ROM. Furthermore, I'd appreciate it if you'd send
- me a free copy of the CD.
-
- Many thanks to my beta testers:
- Kovács Balázs
- Martin van Es
- Nico Geppert
- Stefan Hartmann
- Andreas Portele
- Mark Stehr
-
- Thanks to Tom Record for support.
-
- Thanks to André Baresel, Ethan Brodsky and Craig Jackson for Sound Blaster
- programming info.
-
- The information about the MS Video 1 and the Cinepak Codecs are from XAnim.
- Thanks to Marc Podlipec.
-
-
- The Graphics Interchange Format(c) is the Copyright property of CompuServe
- Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.
-
- PCX files are PC Paintbrush format images. PC Paintbrush is published by
- Z-Soft.
-
- TARGA is a registered trademark of Truevision, Inc.
-
- Windows is a trademark of Microsoft Corporation.
-
- This product uses Ultimotion(tm) IBM video technology. Copyright
- International Business Machines Corporation 1994, All rights reserved.
-
- All other product names mentioned in this software are trademarks or
- registered trademarks of their respective owners.
-
-